|
Procedures, Instructions and Drivers
If you need help with something that
is not listed please email us and we will make a YouTube :)
YouTube Videos
Allen Bradley CPU/Cable Procedure
Allen Bradley 64 and 32 Bit PC
1747-UIC
http://www.youtube.com/watch?v=uWgu1jdAPkE
Allen Bradley 32 Bit PC 1747-UIC
http://www.youtube.com/watch?v=Jn3Ja6kJdb8
Allen Bradley PCIS 1784-PCC
http://www.youtube.com/watch?v=7TDEKX-SuG8
Allen Bradley 1747-CP3 or
1761-CBL-PM02
http://www.youtube.com/watch?v=QIu1AGUR4N8
Allen Bradley 1784-U2DHP
http://www.youtube.com/watch?v=8aqH7vIV3hE
Allen Bradley Programming Lessons
Allen Bradley Lesson 1 MicroLogix
RSLogix 500 1100
http://www.youtube.com/watch?v=Q3CmJSuX4Nk
Allen Bradley Lesson 2 RSLogix 500 ~
One button turn on/off (flip flop)
http://www.youtube.com/watch?v=U2mSBE0ufcY
Allen Bradley Lesson 3 RSLogix 500
Flasher MicroLogix and SLC
http://www.youtube.com/watch?v=kHvtxPcPRyQ
Allen Bradley
Lesson 4 Intro to Analog MicroLogix
RSLogix 500
http://www.youtube.com/watch?v=CAzCVJHFN3U
Allen Bradley Other Procedures
Allen Bradley 1769-L32e setting up
Ethernet and flashing CPU
http://youtu.be/FkO2BBuuwJw
Allen Bradley 1747-L55x Configuring
Ethernet RSLinx and RSLogix
http://youtu.be/GGdnlTXN-lY
Allen Bradley 1756-ENBT
Configuration using RSLinx
http://youtu.be/Ybvqyx6U6AU
Siemens Cable Procedures
Siemens S7 300 USB MPI Step 7
http://www.youtube.com/watch?v=hmd_8rl8L-c
Siemens S7 200 PPI (standard)
http://www.youtube.com/watch?v=Ud6CfBzye8E
GE Fanuc Cable Procedures
GE Fanuc USB SNP Windows 7 and
VersaPro
http://www.youtube.com/watch?v=sATVc0DOpVo
GE Proficy Machine Edition
IC690USB901 and USB/SNP
http://www.youtube.com/watch?v=ttRc0pcp57c
Omron CX-One Cable Procedures
Omron
C200HS-CN200-EU, CS1W-CN226,
CQM1-CIF02
http://www.youtube.com/watch?v=j_3F4_kN3Ss
Mitsubishi GX Cable Procedures
Mitsubishi SC09 and SC09-FX
http://www.youtube.com/watch?v=5dFtgX-vs5Q
Automation Direct Cable Procedure
Automation Direct D2-DSCBL
http://www.youtube.com/watch?v=e2Vpcakb6Yk
Other Procedures
Changing a USB COM port number
http://www.youtube.com/watch?v=ND7wHHNQgqs
Allen Bradley
-
Instruction/Procedure for Allen Bradley DF1
configuration
HERE
This is use for MicroLogix
(1000-1500 and SLC's 500 communication
from PLC to PC
-
Instruction/Procedure for Allen
Bradley 1747-PIC configuration
HERE This is the communication
between your SCL 500, SLC 501, SLC
502 PLC and your PC, this works for
our cables and all others also,
Allen Bradley stop supporting
this driver, so it will not work
with Windows XP Pro service pack
3 and any OS later, this
includes Vista and Windows 7.
-
Manuals for Allen Bradley
(Rockwell Automation) RSLogix
500,
use these with our trainers
RSLogix500 Manual
MicroLogix1000
Manual
1745-PCC cable ((USB and serial))
-
This
is the procedure we wrote for
WinXP, we test every cable we
make... so we hated starting up
the old and slow Win98 machine
to test cables, that's when I
found DosBox its very nice (and
free)
www.plctrainer.net/DOSBOX.pdf
, if using a USB or serial you
will need to change the config
file so it points to the proper
com port, use this version of
DOSBOX as the newer versions
will not let you configure the
com ports
-
Also
read this
http://www.plctalk.net/qanda/showthread.php?t=40829
its from a forum that has a ton
of information, this is about the PCC cable, post 30 is about the
Com setting of DosBox
-
We
have also used this cable (USB
and Serial) with Windows 7
(standard and XP Mode)
-
See
here for a YouTube video on how
to setup
http://www.youtube.com/watch?v=7TDEKX-SuG8
All USB Cables
Allen
Bradley, Omron, Automation Direct,
GE.... USB Drivers and
Procedures click the link below
ModBus
Drivers
www.ind-concepts.com/ModBus.zip
Siemens auto and high speed
click link below
www.ind-concepts.com/SHSDriver.zip
Setup instructions for the USB adapters
see link below
www.plctrainer.net/USB_Install.pdf
Setup instructions for the USB-RS232
see link below
http://www.ind-concepts.com/USB-RS232.zip
PCMCIA to Serial card
DEMO Downloads
Peak HMI (PC Based HMI)
Install
instructions:
Demo Software:
This is the HMI
software
Peak Demo Projects/Programs:
These are the
HMI programs wrote for you to be
used with your PLC (choose your
brand)
These are the programs to download
into your PLC
|