USB Programming
Cables
|
|
|
|
|
1747-UIC (USB to 1747-PIC)
This cable will work with your
1747-L5xx PLC... 5/00, 5/01, 5/02 and 5/03's that are 485 with your USB port on
our PC.
You will also need RSLinx 2.53 or greater, RSLinx is
free from Rockwell Automation (Allen Bradley) and can be
downloaded from link below, please do this first before
you purchase the cable.
Will not work with an AIC network
$84.95
(1747-UIC)
|
USB 1761-CBL-PM02 & USB 1746-CP3
This cable replaces the Allen-Bradley USB 1747-CP3,
1756-CP3 and
1761-CBL-PM02
MicroLogix, SLC, CompactLogix and Controllogix
With
this one USB cable
(set) you can program all
Allen Bradley MicroLogix
PLC's (1000, 1100, 1200,
1400,
1500) AND the SCL line
(5/03, 5/04 and 5/05) AND
CompactLogix AND
ControlLogix via the USB
port on your PCC
$49.95
(SALE
44.95)
|
USB 1761-CBL-PM02
This cable replaces the
USB-1761-CBL-PM02
Used for programming
MicroLogix 1000, 1100, 1200,
1400 and 1500
All
MicroLogix PLCs
$29.95
(USB-1761-CBL-PM02)
|
|
|
|
|
|
1747-CP3, 1761-CBL-PM02 and
1747-UIC
This is a direct replacement
cable for set Allen Bradley Programming 1747-UIC USB
2711-NC13 1747-CP3 1761-CBL-PM02
USB 1747-UIC
SLC 5/00 through SLC 5/03 via DH485 or PanelView's
USB 1747-CP3/1756-CP3
SLC
5/03 through SLC 5/05 via the serial port RS232 (DB9) and
ControlLogix/CompactLogix
USB 2711-NC13
All RS232/upload/download PanelViews,
USB 1761-CBL-PM02
All
MicroLogix 1000/1100/1200/1400 and 1500
USB Combo set
$179.95
|
USB 1784-CP10
This cable replaces the Allen-Bradley USB
1784-CP10
Use on PLC-5 series channel 0
USB to 25pin male
$36.95
|
USB 1747-CP3
This is
a direct replacement cable
for Allen Bradley
Programming Cable Allen
Bradley USB-1747-CP3 or
USB-1756-CP3
Necessary for
communication/programming
the SLC 5/03, 5/04, 5/05 or
ControlLogix and
CompactLogix (DF1) using a
PC with USB
$39.95
|
|
|
|
|
|
USB 2711-NC13
This is a direct replacement
cable for programming PanelView HMI's
This is a direct replacement cable
for Allen Bradley Programming Cable USB 2711-NC13 2711-NC14
2706-NC13
Necessary for communication/programming from the
USB port on the PC to your PanelView, RS232/PC
$29.95
|
USB 1784-PCC
This cable replaces the Allen
Bradley 1745-PCC
necessary for
communication/programming the SLC 100 and 150 with a USB
adapter.
We have wrote a procedure on how to use
this cable, this procedure is FREE and is on our product
support page of our website, this is done by using a program
called DosBox and works very well also free software and
there are links on how to get the software PCIS that is
needed to communicate with your PLC again for free from
Allen Bradley.... if you have this PLC we recommend
upgrading it to something newer or at minimum getting the
program out and backed up... and other then buying this
cable it can be done for free
$36.95
|
USB to DH+
1784-U2DHP
These are used surplus,
fully tested 30 day money
back guarantee
Used for programming SLC 500
Data Highway Plus (DH+)
Includes the adapter for
PLC5 see below
(5 in stock)
$1,149.95
(SALE)
|
|
|
|
|
|
|
Serial Cables |
|
1761-CBL-PM02
This is our replacement cable for all Allen Bradley
MicroLogix PLC's, this is made by us and has a lifetime
replacement guarantee.
This cable will work with all MicroLogix PLC 1000, 1100,
1200, 1400 and 1500's see our product support page for
procedures on how to communicate with the PLC's
$19.95
|
1761-CBL-PM02
This is our replacement cable for all Allen Bradley
MicroLogix PLC's, this is made by us and has a lifetime
replacement guarantee.
This cable will work with all MicroLogix PLC 1000, 1100,
1200, 1400 and 1500's see our product support page for
procedures on how to communicate with the PLC's
$13.95
|
Allen Bradley 1784-U2DHP ~ PLC5 /
1784-PCM6 ~ 1784-PCM5
DH+ adapter for PLC5 ~ convert
your PCM6 into a PCM5
This is a
adapter ONLY, you will need either a
1784-PCMK card and 1784-PCM6 cable OR
1784-U2DHP (USB to DH+ cable) if you do not have either one
of these do not buy this cable as it will do you no good....
This will convert either one from the
mini-din to the 9 pin male connector, this is needed for
PLC-5 CPU's and other DH+ devices
$21.95
|
|
|
|
|
Allen Bradley PLC 1747-CP3
1756-CP3 & 1761-CBL-PM02
This is a direct replacement cable for Allen Bradley
Programming Cable 1747-CP3 or 1756-CP3
Necessary for communication/programming the SLC 5/03, 5/04,
5/05 or ControlLogix (DF1) using a PC, you will also receive
a short cable, this is an adapter that will convert the CP3
to a 1761-CBL-PM02
and work with all MicroLogix PLC's
$24.95
|
1784-CP10
This cable replaces the Allen-Bradley USB
1784-CP10
Use on PLC-5 series channel 0 serial to 25pin male
$17.95
|
Allen
Bradley SLC 1747-CP3 ControlLogix 1756-CP3
This is a direct replacement cable for Allen Bradley
Programming Cable 1747-CP3 or 1756-CP3
Necessary for communication/programming the SLC 5/03, 5/04,
5/05 or ControlLogix (DF1) using a PC
$13.95
|
|
|
|
|
MicroLogix Adapter
Cable is molded construction on
both ends, this cable has a straight end on the PLC
side
This is a 1747-CP3-Micro it
will convert your 1747-CP3 (or 1756-CP3) cable into a
1747-CBL-PM02 and then you can program the MicroLogix line
of PLC's
This cable will work with all MicroLogix PLC 1000, 1100,
1200, 1400 and 1500's see our product support page for
procedures on how to communicate with the PLC's
Y ou must have a 1747-CP3
$13.95
|
Allen
Bradley PLC SLC-100/150 1745-PCC
This cable replaces the large Allen
Bradley 1745-PCC necessary for
communication/programming the SLC 100 150
We have wrote a procedure on how to use
this cable with Windows XP, this procedure is FREE and is on
our product support page of our website, this is done by
using a program called DosBox and works very well also free
software and there are links on how to get the software PCIS
that is needed to communicate with your PLC again for free
from Allen Bradley.... if you have this PLC we recommend
upgrading it to something newer or at minimum getting the
program out and backed up... and other then buying this
cable it can be done for free
$34.95
|
Allen Bradley Programming
Cable 1747-PIC SLC 5/00-5/03
This is a direct replacement cable for
Allen Bradley Programming Cable 1747-PIC SLC500-503
necessary for communication/programming the SLC 5/00, 5/01,
5/02 or 5/03
Please
read: No 1747-PIC will work with a USB adapter you
have to have a real serial port or see our ebay store for
the 1747-UIC this is a USB version of the 1747-PIC, if you
are using Windows XP service pack 3 you will need to make
some changes to your system as the 1747-PIC are not
supported any longer by Rockwell so RSLinx will not work,
you can email us or see our product support page for help
with either one of these (for free), you will receive a
procedure on the setup with your confirmation email if you
purchase from us. You must contact us for the help with SP3,
our USB version will work with SP3.
$29.95
|
|
|
|
|
Allen Bradley 1761-CBL-HM02
1761-CBL-AM00
Allen Bradley 1761-CBL-HM02 replacement
Many uses... 1761-NET-ENI to MicroLogix, 1761-AIC to
MicroLogix, PanelView to Micro, AIC to AIC, etc...
Cable length about 18 inches end to end
$19.95
|
Allen Bradley PanelView
2711-NC13 2711-NC14 2706-NC13
This is a direct replacement cable for Allen Bradley
Programming Cable 2711-NC13 2711-NC14 2706-NC13 necessary
for communication/programming from the PanelView to PC,
RS232/PC
Cable is molded construction on
both ends, length is aprox 10ft
$14.95
|
Allen Bradley Micrologix PanelView
2711-NC21 NC22
This is a direct replacement cable for
Allen Bradley 2711-NC21 and 2711-NC22 necessary for
communication between MicroLogix and PanelView
Cable is molded construction on
both ends, length is aprox 10ft
$14.95
|
|
|
|
|
Allen Bradley 1761-CBL-HM02
HMI to MicroLogix
Allen Bradley 1761-CBL-HM02 replacement
HMI/PanelView with Mini connector to all MicroLogix
PLC's ....and Handheld programmer to MicroLogix (1000,
1100, 1200 and 1500) also 1761-NET-ENI to MicroLogix
|
|
Allen
Bradley 1747-C13 Ser B (new ~ orginal)
Allen Bradley 1747-C13
New and orginal AB cable,
several uses...
|
|
|
|
|
Programming Help and Automation Links
 |
Ind-Concepts LLC
Saluda, SC 29138
(864) 445-2851
email
info@plctrainer.net
|
Product Support
and Downloads
|
|
|
|
|
